Make a cone

Now we will try to make a simple cone at the end of the cylinder we have made.

Select INSERT >  FEATURE DESIGN> CONE

Just like making and Cylinder Block, there are various ways to

create a cone that can be viewed by scrolling to the dropdown menu in the Type box.

The contents of the box type menu are:

• diameters, Height

• diameters, Half Angle

• Base Diameter, Height, Half Angle

• Top Diameter, Height, Half Angle

• Two Coaxial Arcs

Please select diameters, HEIGHT

Click on the Vector Constructor icon to specify a specific vector.

Select the ZC-Axis so that the vector that points toward the positive Z

Click OK

Click on the icon Point Constructor, Set Point to set the origin of the cylinder.

Point Constructor window will appear.

Select the Arc / Ellipse / Sphere Center icon in the dialog box and click on the upper edge of a circular cylinder

or

For the Base Point coordinates, fill with the values​​: XC = 0 YC = 0 ZC = 20 Click OK

In the cone window, type the following values​​:

Base diameter = 10mm

Top Diameter = 13mm

Height = 7mm

Click OK

READ MORE.......

untuk lebih lengkap dan update tentang unigraphics simple tutorial silahkan kunjungi :

www.unigraphicsimpletutorial.blogspot.com

Share this post